Roman Blinds

 Roman Blinds – lined and  interlined as standard

Handmade Roman Blinds supplied with interlining to provide excellent heat insulation with a blackout option for bedrooms. The rod pockets are made in the face lining and the layers are hand-sewn together so that no machine stitching is visible. All blinds are supplied fitted onto either lined wooden batten or a head rail system with a beaded side chain mechanism (fitted left or right).

  • Maximum width/drop – 1.8 metres
  • Add 10 cm to the width and 20 cm to the length of the finished blind size.
  • So – If the blind measures 117 cm wide x 163 cm long you will need a piece of fabric which measures approx. 127 cm wide x 183 cm  long
  •  Any remnants will be sent back to you.
  • Price of head rail cartridge will be quoted in addition to make up cost. Price dependent on width of blind.
  • We supply all the linings.

PRICES: Price per square metre = £70.00 (minimum price per blind £70.) So for example, a blind measuring 1.17 m x 1.63 m  = 1.90 square metres x £70

Which makes the cost to you £133.00.(+ your fabric)

How to measure for a blind inside the window recess.

Width Measurement: Measure at the top, middle & bottom, take the smallest measurement of the three and then deduct 1 cm so that there is a little bit of clearance space for the blind to easily pull up and down without snagging; this measurement is the finished blind width.

Length Measurement: Measure the recess from top to bottom, do not deduct anything, this measurement is the finished blind length.

To Floor Measurement  from this measurement we will calculate the length of beaded control you require to conform with the latest safety standard BS EN 13120.

For a blind outside the window recess:

Length Measurement: We recommend that the top of the blind be set 10-15cm above the window and that a further 5cm is added to the length ie. below the sill. How far above the top of the window is a matter of personal preference as this alters the proportions of the window space and depends on space available.

Width Measurement: We suggest that the width of the blind is the same width as the window sill. Again, this is a matter of personal preference and depends on space available.

To Floor Measurement  from this measurement we will calculate the length of beaded control you require to conform with the latest safety standard BS EN 13120.

So, just three measurements : width, drop and installation height. Also, please let us know if you would prefer the chain on the right or the left hand side of the track.

YOUR BLIND WILL BE MADE TO THE EXACT MEASUREMENTS GIVEN and will be delivered to your door via courier unless collected..

* Child safety is our absolute priority and therefore, we strictly adhere to all the current blind safety legislation. Your blind will come with a basic cleat/chain tidy as standard and also has breakaway cord connectors on the reverse to ensure maximum safety. In addition to this, the bottom of the side chain can be no longer  than 150 cm off the floor.

 

 

 

 

 

 

 

 

 

 

Comments are closed.